Large washing equipment includes washing machines, dryers, folding machines, ironing machines and other large equipment. The normal life of large washing equipment is about eight years. If the equipment is not maintained regularly, or operated according to the specifications, it will make the equipment aging in advance and there will be all kinds of failure problems. Explain the daily maintenance work of different kinds of washing equipment for you.

Washing machine is the most basic equipment in large washing equipment, now the washing machine is more and more intelligent, so how should we maintain at ordinary times:

1. Check whether the main motor has abnormal sound and vibration, and whether it has abnormal heating; Whether the connectors are loose; Whether the cooling fan of the inverter is running normally.

2. Regularly check the tightness of the transmission triangle belt; Check whether the water outlet at the lower part of the main bearing block is smooth to ensure that the bearing has no water accumulation and extends the life of the bearing.

The industrial dryer is also called drying equipment or dryer. The civil dryer is a kind of washing machinery. It is generally used to remove the moisture in clothing and other textiles after washing and dehydration. Daily dryer inspection:

1. When starting the drying machine for the first time, it is necessary to open the hydrophobic bypass valve, drain the condensate in the heater and steam pipe, and then close the hydrophobic bypass valve. After working every day, drain the surplus water, open the front door, close the total intake valve and the total intake valve.

Folding machine is a kind of auxiliary equipment for garment processing. It controls the speed and position of the cloth transmission system, determines the length of the cloth and calculates the folding length, and completes the horizontal folding and cross folding by the jet and refraction of the air flow. Check the folding machine every day:

1. There are retained linen or clogged linen in the washing equipment, which should be removed first. Because the thin cotton tape or cotton yarn will cause the photoelectric switch black or change the effective diameter of the roller.

2. If the washing equipment is shut down for a long time, it should run for 5 minutes according to the normal procedure before starting, so as to confirm whether the washing equipment is running normally without noise.

Every year: check the clutch, brake wear, if necessary to make the corresponding adjustment or replacement.

Every five years: replace the PLC battery. In doubt, please ask the manufacturer.

Ironing machine is a kind of washing machinery, belonging to the laundry ironing equipment. Its main components are generally a single, two rollers (or three rollers, four rollers, five rollers and even six rollers), roller by hand or electric rotation, after a certain temperature, when the wet clothes through the two rollers, can remove a lot of water, and achieve the effect of ironing. Used for sheet, tablecloth, cloth, etc.

1. When the speed of the ironing machine is adjusted by the speed regulating motor and the inverter control knob, it should be adjusted slowly and evenly, and the sharp rise and fall should be avoided to ensure its service life.

2, because the ironing machine is high temperature equipment, so after the work, should be closed in the case of heat source, low speed operation ironing machine until the drum fully cooling can stop, so as to avoid the guide belt for a long time in the high temperature state (electric heating ironing machine is more serious) and shorten the service life.

Large washing equipment for our enterprise to strengthen the work efficiency, improve the cleaning quality. Good equipment should be maintained regularly to extend the life of equipment.